Mirth ADT Interface Generator: A User Manual and Technical Dive

TS Mirth ADT Interface Generator: A Complete Guide to Setup, Configuration, and Technical Deep Dive

Welcome to our three-part series on mastering the TS Mirth ADT Interface Generator for seamless healthcare data integration. This guide is designed to help you install, configure, and understand the technical intricacies of the TS Mirth ADT Interface Generator, ensuring smooth HL7 ADT message processing and deployment.

Streamlining Healthcare Data Integration: A Technical Deep Dive into the Technosoft Mirth ADT Interface Generator

This article provides a detailed technical overview of the TS Mirth ADT Interface Generator, a tool developed to streamline the complex process of setting up ADT channels for healthcare data integration.

Problem Statement:

In healthcare, HL7 v2.x is the primary standard for interface integration. Implementing HL7 requires an interface engine, and Mirth is one of the most widely used open-source solutions for this purpose. However, users who are new to Mirth often face a significant challenge: they lack a reference interface to guide them in creating new interfaces. The first step in any healthcare integration project is typically setting up an ADT (Admission, Discharge, Transfer) interface, which includes patient demographics and is essential for starting new interface projects.

Solution

To address this challenge, we provide a solution for those who want to install and understand the ADT interface in Mirth. We have developed sample inbound and outbound ADT interfaces, which are publicly available. This guide explains how to install Mirth for the first time, outlines the prerequisites, and provides you with ready-to-use ADT interfaces (both inbound and outbound) that you can deploy after installation. These interfaces are designed to connect seamlessly with any ADT system, whether for internal hospital use or external integration.

If you are new to Mirth and unsure how to create an interface, this guide will walk you through the entire process: from installing Mirth and its prerequisites to deploying sample ADT interfaces. Whether you need an inbound interface for receiving patient data or an outbound interface for sending it, we’ve got you covered.

Getting Started with TS Mirth ADT Interface Generator

Prerequisites

To successfully install and utilize the TS Mirth ADT Interface Generator, a development machine must meet the following software requirements:

• .NET Framework 4.0: The foundational framework required for the application to run.
• Mirth Connect: The core integration engine that the generator configures.
• MySQL or SQL Server: A database server is required for Mirth’s internal operations.
  • MySQL Download: Visit this link to download the MySQL installer.
  • For help with installing MySQL, please visit the following URL for detailed installation assistance.
  • SQL Server Download: Visit this link to download SQL Server.
  • For assistance while installing SQL Server, please visit the following URL for detailed installation assistance.

Setting up and installing Mirth Connect

The Mirth Connect installer guides the user through the setup. Users must first accept the Mozilla Public License 1.1 (MPL 1.1). The process continues with selecting a destination directory, choosing components (Mirth Connect Server, Mirth Connect Server Manager, and Mirth Connect CLI), and configuring shortcuts.

The following are the steps for installing Mirth Connect:

Download Mirth Connect

• First of all, we need to download Mirth and install it on our development machine.
• Mirth Connect setup can be easily acquired from the download section of their official website.
• Download: Here’s the link to download Mirth Connect.
• Choose the appropriate version according to your system specifications.

Installation and Configuration of Mirth Connect

The following steps outline the installation and configuration of Mirth Connect. After downloading Mirth Connect and executing the setup, the installer will show the Mirth Connection setup welcome screen.

1: Press the “Next” button on the welcome screen, and the setup will show the license agreement screen

2: Read the license carefully and choose the option shown in the above figure. Press the “Next” button.

3: The destination directory can be changed according to the requirement. Press the “Next” button.

4: The setup will show the screen containing a list of components that should be installed. Choose the options as shown and press the “Next” button.

5: The Setup will show the option to create a start menu and shortcuts links option screen. Press the “Next” button as shown in the figure below.

6: On the “Server Settings” screen, use the default ports if they are available. You can change them later if needed. Click Next to continue.

7: The Setup will show the “Security Settings” screen on which options regarding password requirements need to be set. If no specific requirements are needed, leave the default values and click ‘Next.’

8: The ‘Server Settings’ screen shows the options for saving the physical location of application data and specifying where the log will be maintained. Leave the default values, later locations can be changed. Press the “Next” button.

9: The Setup will show another “Server Setting” screen for installing the Windows service. Press the “Next” Button.

10: The setup will start installing the Mirth Connect, and on completion, it will show the finish screen of the setup as shown in the figures below.

11: On the finish screen, setup will ask to view the readme and give the option to run the Mirth server manager. Choose  options and press the “Finish” button

Once the Mirth is installed on the system, it will need to be configured through the “Mirth Connect Server Manager”.

Launch the “Mirth Connect Server Manager” from Program -> Mirth.

1: The “Database” tab determines which database Mirth uses internally. For this guide, we’ve selected SQL Server, but Mirth also supports MySQL, Oracle, and other databases.

2: By default, Mirth uses ports 8080, 8443 and 1099 and these should work fine unless they conflict with other services on the existing system, in which case they can be changed in the server tab.

3: Now the Mirth Connect is installed. It will be downloaded and will ask for the credentials. We can give any credentials. Later, we will use the same credentials for accessing the Mirth administrator.

How to Install “TS Mirth ADT Interface Generator”

Follow the procedure described below for the installation and the procedure to generate the interface using the TS Mirth ADT Interface Generator.

Run Setup

Run the setup of the TS Mirth ADT Interface for installing the application. The following are the simple steps for installation.

1: Run Setup

Press the “Next” button.

2: Select Installation Folder Screen

Edit the folder path (if required), Prethe ss “Next” button.

3: Installation Confirmation

Press the “Next” button to confirm the installation.

4: Installation Complete

The installation is complete. Click Close to finish the setup.

Would you like to Explore Our Healthcare Projects?

Next Steps